Intel atom x7000re series and intel core i3-n305 and intel processor n97 on 3.5'' sbc (code name: amston lake / alder lake-n) (84 pages)
Summary of Contents for Advantech MIO-4370
Page 1
User Manual MIO-4370 ® 12th/13th Gen. Intel Core™ Processor S-series (LGA1700) on 4" EPIC SBC...
Page 2
No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable.
Page 3
Product Warranty (2 years) Advantech warrants the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by Advantech, or products that have been subject to misuse, abuse, accident, or improper installation.
Page 4
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This type of cable is available from Advantech. Please contact your local supplier for ordering information.
Page 5
Packing List Before system installation, check that the items listed below are included and in good condition. If any item does not accord with the list, contact your dealer immediately. 1 x MIO-4370 SBC 1 x USB 2.0 Cable 20cm (P/N: 1700030406-01) ...
Page 10
MIO-4370 provides scalable power and performance with a hybrid architecture design combining Performance-cores and Efficient-cores, and enhanced graphics with Xe architecture. MIO-4370 offers embedded API, such as iManager 3.0, SUSI 4.0, and WISE-Devi- ceOn, created by Advantech to monitor and control system operation effectively and remotely.
Page 11
Storage: 60 °C @ 95% relative humidity, non-condensing Vibration 3.5 Grms Resistance Certification CE, FCC Class B Dimensions 165 x 114 mm (6.5" x 4.5") Mechanical Net Weight 320 g (w/o CPU & Cooler) *Note: Support by request MIO-4370 User Manual...
Page 14
Introduction MIO-4370 is a multi-I/O SBC (Single Board Computer) designed with a 4-inch com- pact form factor. This chapter includes board dimensions and assembly instructions for the standard thermal solution. Board Layout: Dimensions 109.93 65.08 5.08 Figure 2.1 MIO-4370 Mechanical Diagram (Top Side)
Page 16
This section introduces installation of the cooler, which is the optional accessory and is not included in the default package under standard P/Ns. Please assemble the CPU Cooler according to the following diagram. Figure 2.5 MIO-4370 Cooler Installation MIO-4370 User Manual...
Page 20
Table 3.2: AT Mode/Load BIOS Default: J1 Jumper Short Panel Function AT_DET# Open: ATX mode Short: AT mode (Default) NORMAL_BIOS Open: Normal (Default) Short: LOAD_BIOS_Default setting: Open: Normal (Default) Short: Load BIOS Default Top Swap: Open: Normal (Default) Short: Top Swap function MIO-4370 User Manual...
Page 21
Jumper Short Panel Voltage +3.3V (Default) +12V Connectors 3.4.1 DC Power Input Connector (180D): DCIN1 Table 3.4: DC Power Input Connector (180D): DCIN1 ADV P/N 1655004584-01 Mfr./MPN Jih Vei Electronics / 24W4310-04S10-01T-3.3-R Signal Pin Definition +V24_V12_DC_IN +V24_V12_DC_IN MIO-4370 User Manual...
Page 42
AMIBIOS has been integrated into a plethora of motherboards for decades. With the AMIBIOS Setup program, you can modify BIOS settings and control the various sys- tem features. This chapter describes the basic navigation of the MIO-4370 BIOS setup screens.
Page 43
BIOS supports your CPU. If there is no number assigned to the patch code, please contact an Advantech application engineer to obtain an up-to-date patch code file. This will ensure that your CPU‘s system status is valid.
Page 44
4.1.2 Advanced BIOS Features Setup Select the Advanced tab from the MIO-4370 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub-menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
Page 45
Enable/Disable PCIE Native Control reported in the ACPI Table. Native ASPM Choose whether the ASPM feature is controlled by the OS or BIOS. BDAT ACPI Table Support If Enabled, determines whether to support the BDAT ACPI Table. MIO-4370 User Manual...
Page 46
This item allows users to Enable/Disable Hyper-Threading Technology. BIST Enable/Disable BIST (Built-In Self Test) on reset. AP threads Idle Manner AP threads Idle Manner for waiting signal to run. Enable/Disable AES (Advanced Encryption Standard). MachineCheck Enable/Disable Machine Check. MIO-4370 User Manual...
Page 47
Configure Total Memory Encryption (TME) to protect DRAM data from physical attacks. 4.1.2.3 Power & Performance CPU – Power Management Control CPU – Power Management Control Options. GT – Power Management Control GT – Power Management Control Options. CPU - Power Management Control MIO-4370 User Manual...
Page 48
Platform PL2 Enable – Enable/Disable Platform Power Limit 1 programming. – Power Limit 4 Override Enable/Disable Power Limit 4 override. – C states Enable/Disable CPU Power Management. PowerLimit 3 Settings – Power Limit 3 Settings. View/Configure Turbo Options MIO-4370 User Manual...
Page 49
Enable/Disable Power Limit 1 override. Power Limit 2 Override Enable/Disable Power Limit 2 override. Power Limit 2 Power Limit 2 value in milliwatts. Energy Efficient Turbo Enable/Disable Energy Efficient Turbo feature. Power Limit 3 Settings MIO-4370 User Manual...
Page 50
Power Limit 3 Override Enable/Disable Power Limit 3 override. GT - Power Management Control MIO-4370 User Manual...
Page 51
RC6 (Render Standby) – Check to enable render standby support. – Maximum GT frequency Maximum GT frequency limited by user. – Disable Turbo GT frequency Enable/Disable Turbo GT frequency. MIO-4370 User Manual...
Page 52
ME Unconfig on RTC Clear When Disabled, ME will not be unconfigured on RTC Clear. Core BIOS Done Message Enable/Disable Core BIOS Done message sent to ME. Firmware Update Configuration Configure Management Engine Technology Parameters. MIO-4370 User Manual...
Page 53
AMT Configuration USB Provision of AMT – Enable/Disable of AMT BIOS Provisioning. – Active Remote Assistance Process Trigger CIRA boot. – Unconfigure ME Unconfigure ME and reset the MEBx password to default on the next boot. MIO-4370 User Manual...
Page 54
OS. ACPI Sleep State Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed. PCIE Wake Enable or disable PCIE to wake the system from S5. MIO-4370 User Manual...
Page 55
Watch Dog Timer Configuration Watch Dog Timer Configuration Page. Case Open Detection Enable or Disable Case Open Detect Function. GPIO Configuration GPIO Configuration Settings. ACPI Report Method Configuration Select ACPI Reporting Method for EC Devices. MIO-4370 User Manual...
Page 56
Serial Port 1 Configuration Serial Port – Enable or Disable Serial Port (COM). – Change Settings Select an optimal setting for Super IO device. – COM Port Mode COM Port Mode Select. MIO-4370 User Manual...
Page 57
Serial Port 2 Configuration Serial Port – Enable or Disable Serial Port (COM). – Change Settings Select an optimal setting for Super IO device. – COM Port Mode COM Port Mode Select. MIO-4370 User Manual...
Page 58
Hardware Monitor Watch Dog Timer Configuration – Watch Dog Timer Enable or Disable the Watch Dog Timer Function. MIO-4370 User Manual...
Page 59
GPIO Configuration GPIO Control Enable – Choose to control GPIO by EC or user override during POST stage. – GPIO0/1/2/3/4/5/6/7 Configure GPIO0/1/2/3/4/5/6/7. MIO-4370 User Manual...
Page 60
Select ACPI Reporting Method for EC I2C Bus. ACPI Report Method for CAN Bus – Select ACPI Reporting Method for EC CAN Bus. – ACPI Report Method for GPIO – Select ACPI Reporting Method for EC GPIO. MIO-4370 User Manual...
Page 61
Physical Presence Spec Version Select to direct the OS to support PPI Spec Version 1.2 or 1.3. Device Select TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices. MIO-4370 User Manual...
Page 62
4.1.2.8 S5 RTC Wake Settings Wake system from S5 Enable or disable System wake on alarm event. Select FixedTime, and the sys- tem will wake on the hr:min:sec specified. MIO-4370 User Manual...
Page 63
Serial Port Console Redirection Console Redirection This item allows users to configure console redirection detail settings. Console Redirection EMS This item allows users to enable or disable console redirection for Microsoft Windows Emergency Management Services (EMS). MIO-4370 User Manual...
Page 64
4.1.2.10 Intel TXT Information Intel TXT Information Displays Intel TXT information. MIO-4370 User Manual...
Page 65
Maximum time the device will take before it properly reports itself to the Host Controller. 'Auto' uses the default value: for a Root port it is 100 ms, for a Hub port the delay is taken from the Hub descriptor. MIO-4370 User Manual...
Page 67
4.1.3 Chipset Configuration Select the Chipset tab from the MIO-4370 setup screen to enter the Chipset BIOS Setup screen. You can display a Chipset BIOS Setup option by highlighting it using the <Arrow> keys. All Plug and Play BIOS Setup options are described in this sec- tion.
Page 68
VT-D capability. Control Iommu Pre-boot Behavior Enable IOMMU in the Pre-boot environment. X2APIC Opt Out Enable/Disable X2APIC Opt Out Bit. Above 4GB MMIO BIOS assignment Enable/Disable above 4GB Memory Mapped IO BIOS assignment. MIO-4370 User Manual...
Page 69
– SA GV System Agent Geyserville. Memory Scrambler – Enable/Disable Memory Scrambler support. – Force ColdReset Force ColdReset OR Choose MrcColdBoot mode. – In-Band ECC Support Enable/Disable In-Band ECC. – Memory Remap Enable/Disable Memory Remap above 4GB. MIO-4370 User Manual...
Page 70
Graphics turbo IMON current values supported. – GTT Size Select the GTT Size. – Aperture Size Select the Aperture Size. PSMI Support – Enable/Disable PSMI. – DVMT Pre-Allocated Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. MIO-4370 User Manual...
Page 72
VMD Setup Menu Enable VMD Controller – Enable/Disable VMD Controller. MIO-4370 User Manual...
Page 73
PCI Express Configuration PCI Express Root Port 1/2 – PCI Express Port 1/2 Settings. MIO-4370 User Manual...
Page 74
Select to Enable or Disable onboard LAN2 Controller. LAN2 PXE ROM Enable or disable boot option for LAN2 Controller. Restore AC Power Loss Specify what state to go to when power is re-applied after a power failure (G3 state). MIO-4370 User Manual...
Page 75
PCI Express Configuration DMI Link ASPM Control – This item controls Active State Power Management of the DMI Link. – PCI Express Root Port 3 PCI Express Port 3 Settings. MIO-4370 User Manual...
Page 76
Select ‘Enabled’ if Overcurrent functionality is used. – USB3.1 Speed Selection USB 3.1 Speed selection; GEN1 or GEN2. – USB Port Disable Override Selectively Enable/Disable the corresponding USB Port from reporting a Device Connection to the Controller. MIO-4370 User Manual...
Page 77
Enable will lock bytes 38h-3Fh in the lower/upper 128-byte bank of RTC RAM. – BIOS Lock Enable or Disable the PCH BIOS Lock Enable feature. – Force unlock on all GPIO pads If Enabled BIOS will force all GPIO pads to be in the unlock state. MIO-4370 User Manual...
Page 78
HD Audio Configuration HD Audio – Control Detection of the HD-Audio device. Disabled = HDA will be uncondi- tionally disabled. Enabled = HDA will be unconditionally Enabled. MIO-4370 User Manual...
Page 79
4.1.4 Security Select Security Setup from the MIO-4370 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub-menu for the following items, select the item and press <Enter>:...
Page 80
Boot Option #1 Sets the system boot order. Fast Boot Enables or disables boot with initialization of a minimal set of devices required to launch the active boot option. Has no effect for BBS boot options. MIO-4370 User Manual...
Page 81
This item allows you to save the changes done so far as user defaults. Restore User Defaults This item allows you to restore the user defaults to all the options. Boot Override Boot device select can override your boot priority. MIO-4370 User Manual...
Page 82
4.1.7 MEBx MEBx MEBx Login. For all other iAMT Configurations and Settings. MIO-4370 User Manual...
Page 85
Communications port (COM1) IRQ5 EC watch dog IRQ6 CANBus controller IRQ7 Available IRQ8 System CMOS / real-time clock IRQ9 Microsoft ACPI-compliant system IRQ10 Available IRQ11 Display controller IRQ12 Available IRQ13 Numeric data processor IRQ14 GPIO controller IRQ15 Reserved MIO-4370 User Manual...
Need help?
Do you have a question about the MIO-4370 and is the answer not in the manual?
Questions and answers