Software Installation; Declaration Of Conformity - Advantech AIMC-3422 Startup Manual

Jumpers and Connectors
JOBS1+JWDT1: Hardware monitor alarm+watchdog
timer output selection
Function Jumper Setting
2-3 Enable watchdog timer (Default)
4-5 Enable Hardware monitor alarm (Default)
1 2
JME1: Enable ME
Closed Pins Result
1-2
Enable ME
2-3 Disable ME
1
(Cont.)
3 4 5
(Default)
2 3

Software Installation

The drivers for the AIMC-3422 are located on the software
installation CD. Please click through to the desired folder
and follow the on screen instructions to install them.
Caution! The computer is supplied with a battery-powered
realtime clock circuit. There is a danger of explo-
sion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries ac-
cording to manufacturer's instructions.

Declaration of Conformity

This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditons:
1. This device may not cause harmful interference;
2. This device must accept any interference received,
including interference that may cause undesired opera-
tion.
System I/O Interface
AIMC-3422 Startup Manual 3