Setting Up The Direct Function - Pioneer Elite VSX-49TX Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for Elite VSX-49TX:
Table of Contents

Advertisement

Remote Control of Other Components

Setting up the DIRECT FUNCTION

Changing the direct function from ON (the default) will not be necessary for most users. When the direct
function is ON it means the input for the receiver switches in accordance with the function for the remote
control.
Setting the direct function OFF is useful if you have an external video source connected to your TV (a video
source that is not going through the VSX-49TX). For this explanation we'll call this the "external video deck."
You'd like to control external video deck with this unit's remote control so you've assigned it a function button
(for example purposes, the VCR 2 button). Yet, if you put the receiver in VCR 2 mode you'll get no picture on
your TV because the external video deck signal is not going through the VSX-49TX. To get around this problem
you set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press VCR 2 function button you can control
the external video deck with the remote but the receiver does not go into VCR 2 mode.
Remote Setup
RECEIVER
COMMANDER
DVD/LD
VCR1
PRESET RECALL
/DVR
VCR2
LEARNING
VCR3
MULTI OPERATION
TV
Direct Function
RECEIVER
ON
DVD/LD
VCR1
ON
/DVR
ON
VCR2
ON
VCR3
ON
TV
3
74
1
2
REMOTE
BACK
SETUP
LCD
DIRECT FUNCTION
CD-R/
TAPE1
ITEM MEMO
TUNER
VIDEO
KEY LABEL
CONTROL
4
BACK
REMOTE
SETUP
ON
CD
CD-R/
ON
TAPE1
ON
TUNER
ON
VIDEO
ON
SAT
TV
CONTROL
3
1 Press the REMOTE SETUP.
2 Press the DIRECT FUNCTION button.
CD
3 Choose the DIRECT FUNCTION
setting of each MULTI CONTROL
button by pressing on the ON/OFF
SAT
button.
TV
A triangular arrow points from the ON/OFF button
towards a small nub next to the function names (DVD/
LD, CD, etc.) that can be turned ON/OFF. This nub will
disappear if that DIRECT FUNCTION is turned OFF.
Subsequently the nub will not appear on any remote
control screen if the DIRECT FUNCTION is OFF.
4 To leave the Direct Function mode
press the BACK button.
The default setting for all DIRECT FUNCTIONs is
memo
ON.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents