Pioneer Elite VSX-49TX Operating Instructions Manual page 33

10 MASTER VOLUME dial
Adjusts the overall receiver volume.
11 ACOUSTIC CAL. button (see p.56)
Use to switch on and off the Acoustic Calibra-
tion EQ.
12 MIDNIGHT button (see p.57)
Use to switch the receiver into MIDNIGHT
mode.
13 TONE control buttons (see p.58)
TONE button
This button switches between TONE ON and
TONE BYPASS, which bypasses the tone
circuitry.
BASS/TREBLE button
Use to select whether the bass or treble will be
adjusted..
(–/+) buttons
Use to adjust the frequency levels.
14 DIGITAL NR button (see p.56)
Switches the DIGITAL NR on or off.
15 TUNER CONTROL buttons (see p.64-68)
CLASS button – Press repeatedly to switch
the preset station classes.
–/+ button – Use to choose programmed radio
stations.
16 LISTENING CH SELECT button (see
p.49, 59 & 60)
Use this button to select the number of
channels used for playback (5.1, 7.1, or AUTO).
17 MULTI-ROOM & SOURCE buttons (see
p.80-84)
Press to use the multi room feature (requires
an optional PIONEER Multi-Room Remote
Sensor Unit MR-100 or another IR receiver).
CONTROL button: Used together with the
INPUT SELECTOR to select the function or use
with the MASTER VOLUME to select the
volume of the MULTI ROOM system.
ON/OFF button: Use to switch Multi-room
function on or off.
18 PHONES jack
Connect headphones for private listening (no
sound will be heard through the speakers).
Displays & Controls
19 SP SYSTEM A/B button (see p.77)
Use to select the speaker system. A is the
primary setting. The button cycles through the
speaker systems as follows: A]B]A&B]off.
Different conditions apply when bi-amping the
speakers. For this case refer to page 76.
20 SIGNAL SELECT button (see p.51)
Use to select the type of signal being input into
the receiver. Depending on your INPUT ASSIGN
settings (see pages 93-96) available inputs will
change. Since there is no indicator light for
i.LINK, when it is selected none of the indica-
tors listed below will light. When none are lit
this indicates i.LINK is selected. Press SIGNAL
SELECT repeatedly to select one of the
following:
ANALOG – To select an analog signal.
DIGITAL – To select an optical or coaxial digital
signal.
nothing lit – To select an i.LINK signal.
2 RF – To select an 2 RF signal.
AUTO – This is the default setting. The
receiver selects a signal based on availability, in
the following order of priority: i.LINK, 2 RF,
DIGITAL, ANALOG.
21 VIDEO SELECT button (see p.61)
Switches the receiver between the various
types of video input.
22 TAPE 2 MONITOR button
Selects the tape deck (MD recorder, etc.)
connected to the TAPE 2 MONITOR inputs/
outputs. Allows monitoring of a recording as
it's being made.
23 MULTI CH INPUT button
Selects the component (for example, a DVD-A
player) you have hooked up to the MULTI CH
INPUT terminals.
24 SETUP MIC jack
Plug in the setup mic here. This is very impor-
tant for setting up your system to get proper
surround sound.
25 Front VIDEO INPUT jacks (see p.21)
DIGITAL IN : digital input for connecting a
game console, portable DVD player, video
camera (etc.), that has an optical digital
connection.
S VIDEO : Video input for connecting a video
camera (etc.), that has an S video out.
RCA VIDEO / AUDIO (L/R) : Video/audio input
for connecting a video camera, etc. that has
standard RCA video/audio outputs.
33