Setting Up The Direct Function - Pioneer VSX-D2011-G Operating Instructions Manual

Remote Control of Other Components

Setting up the DIRECT FUNCTION

The direct function will not be necessary for most users. It is designed in case you have an external video
source connected to your TV (a video source that is not going through the VSX-D2011). For this explanation we'll
call this the external video deck. You'd like to control external video deck with this unit's remote control so
you've assigned it a function button (for example purposes, the VCR 2 button). Yet, if you put the receiver in
VCR 2 mode you'll get no picture on your TV because the external video deck signal is not going through the
VSX-D2011. To get around this problem you set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press
VCR 2 function button you can control the external video deck with the remote but the receiver does not go into
VCR 2 mode.
S0URCE
DVD/LD
3
VCR2
CD-R/
TAPE1
DIMMER
SIGNAL SEL
VIDEO SEL
SYSTEM SETUP
MENU
2,4
TUNER EDIT
AUDIO
TUNING
STATION
CHANNEL
TV VOL
MOVIE
STEREO/
DIRECT
• To exit from the remote control
memo
setup mode at any time, press
REMOTE SETUP.
• The default setting for all DIRECT
FUNCTIONs is ON.
72
En
SETUP
TV SYSTEM RECEIVER
OFF
VCR1/
TV/SAT TV CONT
DVR
MULTI CONTROL
MULTI
VIDEO CD
OPERATION
MD/
TUNER RECEIVER
TAPE2
LOUDNESS TONE EFFECT/CH SEL
1 2 3 4
+
DNR BASS/TREBLE
5 6 7 8
–
+
HI-BIT 10 DISC
9 0
ENTER
DIRECT ACCESS SEARCH MODE
GUIDE
TOP MENU
TRACK
ENTER
EXIT
RETURN
MPX
TEXT ON RF ATT DISP MODE
¶ 8
SUB TITLE
– +
BAND TUNING
1 3 ¡
– +
TEXT OFF CLASS STATION
4 7 ¢
– +
CHANNEL
TV INPUT INPUT
TV CONTROL
MIDNIGHT VOLUME
TV CH
MULTI CH
INPUT
ACOUSTIC
MUSIC MUTE
EQ
MODE
SURROUND
REMOTE
1,6
SETUP
SB CH
ENTER
MODE
Î
1 Press the REMOTE SETUP button for
three seconds.
The REMOTE SETUP menu appears on the remote
display.
2 Use the 5∞ buttons to select
DIRCTFNC and press ENTER.
SELECT FUNCTION will flash in the remote control
display.
3 Press the MULTI CONTROL button of
the component whose direct
function you want to turn on or off.
DIRECTFUNC appears on the remote control display.
4 Use the 5∞ buttons to select ON,
OFF, or EXIT and press ENTER.
ON: The direct function is on.
OFF: The direct function is off.
EXIT: Leaves the DIRECT FUNCTION settings and
returns you to the REMOTE SETUP menu.
After you press ENTER, if you chose one of the first
two settings, COMPLETE will appear in the display.
5 Repeat steps 2–4 to set the direct
function for as many components as
you want.
6 Press the REMOTE SETUP button to
return to the previous mode.