Remote Control Of Other Component; Setting Up The Remote Control To Control Other Components; Recalling Settings Stored In The Remote Control - Pioneer Elite VSX-49TX Operating Instructions Manual

Remote Control of Other Components
Setting Up the Remote Control to Control Other
Components
In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV,
DVD, CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and
buttons, you only need to use one remote control. If your component(s) are listed in the remote control's
memory, simply follow the steps below. If your component(s) are not listed, or if you want the remote to learn
additional operations, you can use the learning mode to input the information from the remote controls supplied
with your other components.

Recalling Settings Stored in the Remote Control

The following steps show you how to recall the setting stored in the remote control. Once a setting is recalled
and the component assigned, you can use this remote to easily operate the component.
• You can press the BACK button at any time to go back a screen.
memo
• See "Using the Remote Control with Other Components" on page 73 to operate your other compo-
nents.
2
Remote Setup
RECEIVER
LCD
DIRECT FUNCTION
COMMANDER
DVD/LD
PRESET RECALL
VCR1
/DVR
VCR2
LEARNING
VCR3
MULTI OPERATION
TV
Preset Recall
RECEIVER
DVD/LD
VCR1
/DVR
SELECT FUNCTION
VCR2
VCR3
TV
3
Preset Recall [ DVD/LD ]
RECEIVER
SELECT ITEM
DVD/LD
DVD LD
VCR1
/DVR
STB CD
VCR2
TUNER DVR
VCR3
TV
4
1
BACK REMOTE
SETUP
CD
CD-R/
TAPE1
ITEM MEMO
TUNER
VIDEO
KEY LABEL
SAT
TV
CONTROL
BACK REMOTE
SETUP
CD
CD-R/
TAPE1
TUNER
VIDEO
SAT
TV
CONTROL
4
REMOTE
BACK
SETUP
CD
CD-R/
TAPE1
VCR TV
TUNER
MD TAPE
VIDEO
CD-R
SAT
TV
CONTROL
1 Press the REMOTE SETUP.
The REMOTE SETUP menu appears on the remote
control's screen.
2 Press the PRESET RECALL button on
the remote control.
The step by step process will appear on the remote
control. First, SELECT FUNCTION will appear.
3 Choose the button (for example,
DVD/LD) you want to assign to
control the component you want to
operate.
SELECT ITEM will appear in the remote control screen.
4 Choose the component you want to
set up.
In the example in the diagram on the left, DVD/LD was
selected in step 3. Thus, [DVD/LD] appears in the top
bar after Preset Recall.
5 Select the name of the company that
makes your component.
If there are two pages of company names, use the
page +/– buttons to go back and forth between the
two sets of makers' names. For explanation purposes,
we'll use PIONEER as an example.
memo
The TUNER button cannot be assigned.
69