Check The Auto Settings - Pioneer Elite VSX-49TX Operating Instructions Manual

Setting Up for Surround Sound

Check the Auto Settings

If you want to check what settings have been input for your surround sound parameters you can do it following
the steps below.
1
Receiver
RECEIVER
TONE
DVD/LD
VCR1
DISPLAY
/DVR
DIMMER
VCR2
STATUS
VCR3
3 SYSTEM
TV
SETUP
4
System Setup
[Auto Surround Setup]
[1. Input Assign ]
[2. Surround Setup
[3. Expert Setup ]
[4. THX Audio Setup ]
[Exit]
5
2.Surround Setup
[ Check
[ 1.Speaker Systems ]
[ 2.Channel Level ]
[ 3.Speaker Distance ]
[ 4.Acoustic Cal EQ ]
[Return]
48
2
MAIN SUB REMOTE
SETUP
BASS/ CD
ATREBLE
CD-R/
TAPE1
EFFECT/
CH SEL.
VIDEO TUNER
SELECT
VIDEO
SPEAKER INPUT
LOUDNESS
A/B ATT.
SAT
TAPE 2 SIGNAL
TV
MONITOR SELECT
CONTROL
]
]
1 Switch on the receiver and your TV.
Make sure your TV is set to this receiver as you will use
the on-screen displays on your TV to follow these
instructions.
2 Press the SUB button on the remote
control's receiver screen.
3 Press the SYSTEM SETUP button and
use the on-screen display (OSD) that
appears on your TV.
The SYSTEM SETUP menu appears on the OSD.
4 Use the 5∞ buttons to select
SURROUND SETUP and press ENTER.
5 CHECK should be selected, press
ENTER.
6 The first menu in which you can check
your settings will appear. This is the
speaker settings.
Navigate this menu with the 2 3 buttons.
7 When you want to check the next
settings select NEXT with the 5∞
buttons and press ENTER.
The order of the settings menus is: Speaker Systems;
Channel Level; Speaker Distance; Acoustic Calibration
EQ.
If you want to leave the settings check select RETURN
with the 5∞ buttons and press ENTER.
8 Continue to move through the menus
using the 5∞ buttons and pressing
ENTER until you are done checking the
settings.
9 To exit the this mode select RETURN
with the 5∞ buttons and press ENTER.
You will return to the SURROUND SETUP menu. Then
select EXIT and press ENTER to exit the setup process.