Function Rename - Pioneer Elite VSX-49TX Operating Instructions Manual

Advanced Setup

FUNCTION RENAME

Use the FUNCTION RENAME capability to rename the display on the receiver and your OSD for different
functions (DVD, etc.). For example, you could rename VCR1/DVR as "DVR-7000".
5˜∞˜2˜3˜ENTER buttons
1
3.Expert Setup
[1. OSD Adjustment ]
[2. Bass Peak Level ]
[3. D-Range Control ]
[4. Multi-Ch In Select ]
[5. Function Rename
[6. Hi-bit/Hi-sampling ]
[7. Multi-Room Setting ]
[Return]
2
3.5. Function Rename
DVD/LD
DVD/LD
TV
SAT
3
3.5. Function Rename
VCR1/DVR [ VCR1/DVR ]
VIDEO
VCR1/DVR [ VCR1/DVR ]
VCR2
VCR3
4
3.5. Function Rename
VCR1/DVR [ DVR-7000 ]
VIDEO
VCR1/DVR [ VCR1/DVR ]
VCR2
VCR3
6
3.5. Function Rename
CD
CD
CD-R
TUNER
PHONO
[Return]
102
STANDBY/ON
ENTER
]
[ DVD/LD ]
[ DVD/LD ]
[ TV ]
[ SAT ]
[ VIDEO ]
[ VCR2 ]
[ VCR3 ]
[ VIDEO ]
[ VCR2 ]
[ VCR3 ]
[ CD ]
[ CD ]
[ CD-R/TAPE1 ]
[ TUNER ]
[ PHONO ]
Follow steps 1-4 on page 97, if necessary, to get to the
starting point mentioned here.
1 FUNCTION RENAME should be
selected if it isn't use the 5∞
buttons to select it. Press ENTER.
2 Use the 5∞ buttons to select the
name of the function (for example,
"VCR1/DVR") you want to change.
Press ENTER.
The functions are divided into three different on-screen
displays so you may have to move through them to
find the function you want to rename.
3 Use the 2 3 buttons to move the
cursor around and use the 5∞
buttons to enter a letter, number or
symbol.
The possible selections are shown below.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
!"#$%&'()*+,–./:;<=>?@[ \ ]ˆ_{|} (space)
4 Repeat step 3 until you get the name
as you want it.
You can input up to ten characters.
5 Press ENTER. The new function
name is set.
6 Repeat steps 2-5 to change other
function names. Use the 5∞ buttons
to select RETURN and press ENTER.
7 If you want to continue EXPERT
SETUP use the 5∞ buttons to select
the next setup and press ENTER.
Go on to the next page.
8 If you want to finish EXPERT SETUP
use the 5∞ buttons to select
RETURN and press ENTER. Then use
the 5∞ buttons to select EXIT and
press ENTER.