Data Copy Of Acoustic Calibration Eq - Pioneer Elite VSX-49TX Operating Instructions Manual

Data Copy of Acoustic Calibration EQ

We recommend that after you have completed AUTO SURROUND SETUP (p.16) or adjusted Acoustic
Calibration EQ using the AUTO mode (p.45), copy those settings from either ALL CH ADJ or F ALIGN and adjust
CUSTOM1 or CUSTOM2 manually. You can also copy settings between CUSTOM1 and CUSTOM2.
• The way to copy settings is shown below. To adjust them, see Acoustic Calibration EQ on page 45.
If starting fresh, complete steps 1-4 in "Setting Up for Surround Sound" (see p.40) first.
1
2.Surround Setup
[ Check ]
[ 1.Speaker Systems ]
[ 2.Channel Level ]
[ 3.Speaker Distance]
[ 4.Acoustic Cal EQ
[Return]
2
2.4. Acoustic Cal EQ
Manual
[Data Copy]
[CUSTOM1]
[CUSTOM2]
Auto
[ALL ADJ & FRONT ALIGN]
[Return]
Your Speaker Systems
" Normal Surround "
3
2.4. Acoustic Cal EQ
A.Cal EQ Data Copy
←
To
CUSTOM1
CUSTOM2
[Copy OK]
[Cancel]
1 ACOUSTIC CAL EQ should be
]
2 Use the 5∞ buttons to select DATA
3 Use the 5∞ buttons to select to copy
4 To copy the settings use the 5∞
From
[CUSTOM1 ]
[CUSTOM2 ]
5 To cancel the copy use the 5∞
6 You are in the first Acoustic
7 To leave DATA COPY mode, use the
Setting Up for Surround Sound
selected. If it isn't use the 5∞
buttons to select and press ENTER.
You should get the first Acoustic Calibration screen
on your TV.
COPY and press ENTER.
to CUSTOM1 or CUSTOM2 and 2 3
buttons to select a source for the
copy.
The possible sources are:
CUSTOM1 – F ALIGN – ALL ADJ – CUSTOM2
buttons to select COPY OK and press
ENTER and continue with step 6.
buttons to select CANCEL and press
ENTER.
Calibration EQ screen now. To
manually adjust settings go to
Acoustic Calibration EQ, step 2
(P.45).
5∞ buttons to select RETURN and
press ENTER.
You will return to the SURROUND SETUP menu. Select
EXIT and press ENTER to exit the setup process.
47