Hi-Bit/Hi-Sampling - Pioneer Elite VSX-49TX Operating Instructions Manual

HI-BIT/HI-SAMPLING

Use HI-BIT/HI-SAMPLING mode when listening to CDs, DVDs or other digital soundtracks for wider dynamic
range, allowing finer audio reproduction.
ENTER
5˜∞˜2˜3˜ENTER buttons
1
3.Expert Setup
[1. OSD Adjustment ]
[2. Bass Peak Level]
[3. D-Range Control]
[4. Multi-Ch In Select]
[5. Function Renane]
[6. Hi-bit/Hi-sampling]
[7. Multi-Room Setting ]
[Return]
2
3.6. Hi-bit/Hi-sampling
Hi-bit/Hi-sampling
[
dts [OFF]
[Return]
3
3.6. Hi-bit/Hi-sampling
Hi-bit/Hi-sampling
[ OFF ]
dts [OFF]
[Return]
STANDBY/ON
OFF ]
Follow steps 1-4 on page 97, if necessary, to get
to the starting point mentioned here.
1 HI-BIT/HI-SAMPLING should be
selected. If not, use the 5∞
buttons to select it. Press ENTER.
2 Use the 2 3 buttons to select
ON/OFF.
3 Use the 5∞ buttons to select
RETURN. Press ENTER.
HI-BIT/HI-SAMPLING is switched to ON/OFF.
If you want to change the setting again before
proceeding
Start over from step one.
4 To finish EXPERT SETUP use the
5∞ buttons to select RETURN
and press ENTER. Then use the
5∞ buttons to select EXIT and
press ENTER.
Advanced Setup
103