Setting Up The Direct Function - Pioneer Elite VSX-47TX Operating Instructions Manual

Remote Control of Other Components

Setting up the DIRECT FUNCTION

The direct function will not be necessary for most users. It is designed in case you have an external video
source connected to your TV (a video source that is not going through the VSX-47TX). For this explanation we'll
call this the "external video deck." You'd like to control external video deck with this unit's remote control so
you've assigned it a function button (for example purposes, the VCR 2 button). Yet, if you put the receiver in
VCR 2 mode you'll get no picture on your TV because the external video deck signal is not going through the
VSX-47TX. To get around this problem you set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press
VCR 2 function button you can control the external video deck with the remote but the receiver does not go into
VCR 2 mode.
S0URCE
3
SYSTEM SETUP
2,4
TUNER EDIT
CHANNEL
TV VOL
• To exit from the remote control
memo
setup mode at any time, press
REMOTE SETUP.
• The default setting for all DIRECT
FUNCTIONs is ON.
68
SETUP
TV SYSTEM RECEIVER
OFF
DVD/LD TV SAT TV CONT
MULTI CONTROL
VCR1/ MULTI
VCR2 VIDEO
DVR OPERATION
CD-R/
CD TUNER RECEIVER
TAPE1
DIMMER INPUT ATT LOUDNESS SPEAKER A/B
1 2 3 4
VIDEO SEL SIGNAL SEL TAPE 2 EFFECT/CH SELL
5 6 7 8
– + +
TONE BASS/TREBLE 10 DISC
9 0
ENTER
DIRECT ACCESS DISP MODE
1,6
REMOTE SETUP
MENU
ENTER
STATUS EXIT
GUIDE RETURN
MPX
DTV ON/OFF
¶ 8
EXTRA MENU
– +
BAND
TUNING TUNING
1 3 ¡
– +
STATION DTV MENU CLASS STATION
4 7 ¢
– +
CHANNEL
TV INPUT INPUT
TV CONTROL
MIDNIGHT VOLUME
TV CH
DIGITAL
NR
STEREO
THX STANDARD MUTE
/DIRECT
SURROUND
LISTENING
ADVANCED ADVANCED MODE
CINEMA CONCERT
(DVD-A/SACD)
ACOUSTIC MULTI CH LISTENING
LIGHT
CAL INPUT CH SELECT
Î
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
AXD7290
1 Press the REMOTE SETUP button for
three seconds.
The REMOTE SETUP menu appears on the remote
display.
2 Use the 5∞ buttons to select
DIRCTFNC and press ENTER.
SELECT FUNCTION will flash in the remote control
display.
3 Press the MULTI CONTROL button of
the component whose direct
function you want to turn on or off.
DIRECTFUNC appears on the remote control display.
4 Use the 5∞ buttons to select ON,
OFF, or EXIT and press ENTER.
ON: The direct function is on.
OFF: The direct function is off.
EXIT: Leaves the DIRECT FUNCTION settings and
returns you to the REMOTE SETUP menu.
After you press ENTER, if you chose one of the first
two settings, COMPLETE will appear in the display.
5 Repeat steps 2-4 to set the direct
function for as many components as
you want.
6 Press the REMOTE SETUP button to
return to the previous mode.