Multi-Room Setup - Pioneer Elite VSX-49TX Operating Instructions Manual

MULTI-ROOM setup

1
Receiver
RECEIVER
LISTENING MODE
SURROUND
DVD/LD
STEREO
THX STANDARD
/DIRECT
VCR1
/DVR
ADVANCED ADVANCED
VCR2
CINEMA CONCERT
VCR3
DIGITAL
MIDNIGHT
TV
NR
Receiver
RECEIVER
BASS/
TONE
ATREBLE
DVD/LD
VCR1
DISPLAY VIDEO
/DVR
DIMMER SELECT
VCR2
SPEAKER
STATUS
LOUDNESS
A/B
VCR3
SYSTEM TAPE 2
TV
SETUP MONITOR
3
3
System Setup
[Auto Surround Setup]
[1. Input Assign ]
[2. Surround Setup ]
[3. Expert Setup ]
[4. THX Audio Setup ]
4
3.Expert Setup
[1. OSD Adjustment ]
[2. Bass Peak Level ]
[3. D-Range Control ]
[4. Multi-Ch In Select ]
[5. Function Rename ]
[6. Hi-bit/Hi-Sampling ]
[7. Multi-Room Setting
[Return]
5
3.7. Multi-Room Setting
Volume Level
[VARIABLE]
IR Receiver
[PIONEER ]
[Return]
3.7. Multi-Room Setting
Volume Level
[ FIXED
IR Receiver
[PIONEER ]
[Return]
6
3.7. Multi-Room Setting
Volume Level
[VARIABLE]
IR Receiver
[ OTHERS
[Return]
7
3.7. Multi-Room Setting
Volume Level
[VARIABLE]
IR Receiver
[ OTHERS ]
[Return]
CAUTION: If the "FIXED"
position is chosen,the
volume will be loud.
2
1 Turn on the receiver and your TV
REMOTE
MAIN SUB
SETUP
CD
(DVD-A
/SACD)
CD-R/
TAPE1
MULTI CH
IN
TUNER
2 Press the SUB button on the remote
LISTENING
VIDEO
CH SEL.
SAT
ACOUSTIC
TV
CAL.
CONTROL
3 Press the SYSTEM SETUP button
MAIN SUB REMOTE
SETUP
CD
CD-R/
TAPE1
EFFECT/
CH SEL.
TUNER
VIDEO
4 Use the 5∞ buttons to select
INPUT
ATT.
SAT
SIGNAL
TV
SELECT
CONTROL
5 Select the VOLUME LEVEL by
]
6 Select the IR RECEIVER type.
7 Select RETURN (use ∞5) and press
]
8 Use the 5∞ buttons to select
]
memo
Using Other Functions
then, press RECEIVER on the remote
control.
Make sure your TV is set to the receiver.
control.
then select EXPERT SETUP using 5
and ∞. Press ENTER.
The EXPERT SETUP menu appears on the OSD.
MULTI-ROOM SETTING. Press
ENTER.
selecting VARIABLE or FIXED.
If you hook up a just a power amplifier in the sub room
the VSX-49TX will act as a pre-amp. In this case
choose VARIABLE for the VOLUME LEVEL setting. If
you hook up a full integrated amplifier in the sub room
(such as another Pioneer VSX receiver) choose FIXED
for the VOLUME LEVEL setting.
CAUTION!
If the MULTI ROOM is set to FIXED the volume on the
main unit will be set to maximum. Thus, when output, it
will be extremely loud. Please set the master volume
controls of the integrated amplifier in the sub room very
low at first and experiment to find the correct volume.
If you have an IR receiver from a different company
than PIONEER, select OTHERS. If you have the
Pioneer-made MR-100, or the IR receiver you're using
doesn't seem to work after selecting OTHERS, select
PIONEER.
ENTER to go back to the EXPERT
SETUP.
RETURN and press ENTER, again.
Then, use the 5∞ buttons to select
EXIT and press ENTER.
There may be some IR receivers that can't be
used with this receiver. Check with a PIONEER
representative to be sure.
81