Using The Tuner; Automatic And Manual Tuning; Mpx Mode - Pioneer Elite VSX-49TX Operating Instructions Manual

Using the Tuner

Automatic and Manual Tuning

The following steps show you how to tune in FM and AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the exact frequency of the station you want, see "Direct
Access Tuning" on the following page.
LIGHT
RECEIVER
3
DVD/LD
VCR1/
DVR
VCR2
MPX
VCR3
TV
ENTER
64
use lock
TV
CONTROL
Tuner
REMOTE
SETUP
CD
1 2 3
FUNCTION
STATION
CD-R/
+
CH
TAPE1
4 5 6
–
TUNER
CH
TUNING
+
VIDEO VOL
7 8 9
MPX BAND CLASS
–
VOL
SAT
TUNER DISP DIRECT
0
TV
EDIT MODE ACCESS
FUNCTION
CONTROL
MASTER VOLUME
MULTI SYSTEM +
STANDBY/ON OPERATION OFF MUTING
–
2
1 Press the TUNER.
1
On the remote, this selects the tuner function on the
receiver and sets the remote to the tuner operation
mode.
2 Press the BAND button to select the
band (FM or AM).
Each press switches the band: FM j AM
3 Tune in the station.
For Automatic Tuning
Press and hold TUNING –/+ for about one second, then
release.
The tuner starts searching the selected band and stop
automatically at the first station it locates. Repeat to
locate other stations.
For Manual Tuning
• To change frequencies one step at a time, press
TUNING –/+ repeatedly.
• To change frequencies quickly, hold down TUNING
–/+ and release when you reach the frequency you
desire.

MPX Mode

If the TUNED or STEREO indicators do not light when
tuning an FM station, because the station is too far away or
the broadcast signal is weak, press MPX on the remote
control to switch to MONO reception. This should improve
reception enough for you to enjoy the broadcast.