Using The Headphones; Video Select - Pioneer Elite VSX-49TX Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for Elite VSX-49TX:
Table of Contents

Advertisement

Using the Headphones

The headphone feature is explained here.
1
Phones jack

Video Select

This function allows you to listen to one sound source while you watch a different video source on your TV. The
sound source is set in the normal fashion as is explained on p.49 & 50. You then alter the video input with the
VIDEO SELECT button.
1
VIDEO SELECT
Receiver
BASS/
TONE
TREBLE
DISPLAY
VIDEO
DIMMER
SELECT
SPEAKER
STATUS
LOUDNESS
A/B
SYSTEM
SETUP
MONITOR
1 Plug headphones into the Phones
1 Use the VIDEO SELECT button on the
MAIN
SUB
EFFECT/
CH SEL.
1
INPUT
ATT.
TAPE 2
SIGNAL
SELECT
jack on the front of the receiver.
No sound will be audible from the speakers when
headphones are plugged in.
• All listening modes will be downmixed to 2 chan-
memo
nels.
• If you're listening to a 2 channel source there will
be no matrix decoding (i.e. you will not be able to
get surround sound decoding).
• If your U-shaped connectors (see p.34) aren't in
place you won't be able to use headphones.
• "SPEAKER SYSTEMS" (p.41), "SPEAKER
DISTANCE" (p.44) and "Acoustic Calibration EQ"
(p.45) settings have no effect on playback through
headphones.
RECEIVER'S sub screen or the front
panel to cycle through the different
possible video inputs.
The first press shows the video input you are currently
using. After that pressing VIDEO SELECT cycles though
the possibilities in the following order:
DVD/LD
TV
OFF
VCR 3
The OFF setting means you are listening without a
video signal.
After choosing a video input the display on the receiver
will show that input for about 5 seconds and then
revert to showing the listening mode the receiver is in.
• The VIDEO SELECT remains set to the input you
memo
chose until you change the audio input.
• If you change audio functions the receiver will
reset itself to make the video and audio inputs
correspond.
Also, if you switch the power of the receiver off
when you turn it back on the video and audio in-
puts will reset so that they correspond.
Basic Operation
VIDEO
SAT
VCR 2
VCR 1/DVR
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents