Remote Control Backlight - Pioneer Elite VSX-49TX Operating Instructions Manual

LCD Commander
RECEIVER
TOUCH PANEL
ADJUSTMENT
DVD/LD
VCR1 LCD CONTRAST
/DVR
VCR2
10
LCD TIMER :
VCR3
BEEP OFF 1
TV
6

Remote Control Backlight

1
LIGHT
RECEIVER
DVD/LD
VCR1
/DVR
VCR2
VCR3
TV
MULTI SYSTEM
OPERATION
STANDBY/ON
ENTER
6 Decide which other adjustments you'd
7
BACK REMOTE
SETUP
CD
CD-R/
TAPE1
TUNER
VIDEO
SEC
SAT
2 3
TV
CONTROL
7 When you are finished with the
1 Decide whether you'd like to have the
use lock
TV
CONTROL
REMOTE
SETUP
CD
FUNCTION
CD-R/
+
TAPE1 CH
TUNER –
CH
+
VIDEO
VOL
–
SAT VOL
TV
CONTROL FUNCTION
MASTER VOLUME
+
OFF MUTING
–
like to make and press those buttons.
The different possibilities are:
LCD CONTRAST: You can lighten or darken the contrast
on the remote control screen. Use the – /+ buttons to
change the contrast.
LCD TIMER: In order to save the battery a timer will
automatically turn the remote control off after a set
amount of time if no commands are entered. You can
choose how long the idle remote control will stay on
before the timer turns it off. You can set this function in a
range of 5-60 seconds. The default setting is 10 seconds.
Use the – /+ buttons to adjust the number of seconds for
the timer setting.
(The REMOTE SETUP screen and its sub-screens are all
fixed to stay on 60 seconds. If no command is entered
they will turn off after 60 seconds.)
BEEP: When you have sent a command (pushed a button)
the remote control will beep once. You can choose the
sound of the beep from three different possibilities here
by pushing the appropriate button (1,2,3). You can also
turn the beep sound off.
adjustments press the BACK button to
go back to the Remote Setup screen.
backlight on or not and use the LIGHT
switch to turn it on or off.
This button turns the light on or off. If you leave it on the
remote screen is easier to see but uses more energy and
thus wears the batteries down quicker.
Before You Start
11