Assigning I.link Inputs - Pioneer Elite VSX-49TX Operating Instructions Manual

Assigning i.LINK Inputs

With this function you can assign i.LINK-equipped components to a function, for example DVD/LD. By assigning
i.LINK inputs you will be able to select both audio and video signals from i.LINK-equipped components by
turning the Input Selector.
memo
If no i.LINK-equipped components are connected i.LINK Input cannot be selected.
1
Receiver
RECEIVER
BASS/
TONE
ATREBLE
DVD/LD
VCR1
DISPLAY VIDEO
/DVR
DIMMER SELECT
VCR2
SPEAKER
STATUS
A/B
VCR3
3
SYSTEM
TV SETUP
4
System Setup
[ Auto Surround Setup ]
[1. Input Assign
[2. Surround Setup]
[3. Expert Setup]
[4. THX Audio Setup]
[Exit]
5
1.Input Assign
[ 1.Digital-In ]
[ 2.Component Video In ]
[ 3.i.LINK Input
[Return]
6
1.3. i.LINK Input
1 DV-757Ai
2 DV-47Ai
[Return]
2
MAIN SUB REMOTE
SETUP
CD
CD-R/
TAPE1
EFFECT/
CH SEL.
TUNER
VIDEO
INPUT
LOUDNESS
ATT.
SAT
TAPE 2 SIGNAL
TV
MONITOR
SELECT
CONTROL
]
]
[ i.LINK ]
[ i.LINK ]
1 Turn on the receiver and your
TV, press the RECEIVER on the
remote control.
2 Press the SUB button on the
remote control.
3 Press the SYSTEM SETUP
button.
4 Looking at the on-screen display
on your TV, use the 5∞ buttons
to select INPUT ASSIGN. Press
the ENTER button.
5 Use the 5∞ buttons to select
i.LINK INPUT. Press the ENTER
button.
6 Use the 5∞ buttons to select an
i.LINK-equipped component.
When a number of i.LINK-equipped
memo
components are connected to your receiver,
the i.LINK-equipped component you are
looking for might be listed on additional
display screens. When the top or bottom
input is selected, pressing 5 button or ∞ will
display any previous or next display screen.
When you press ENTER the cursor moves to
RETURN.
Advanced Setup
95