Dualwatch And Tri-Watch (Except For The Nld Version); Description; Operation - Icom IC-M25 Instruction Manual

6

DUALWATCH AND TRI-WATCH (Except for the NLD version)

Description

Dualwatch and Tri-watch are convenient to periodically
check Channel 16 while you are operating on another
channel.
Dualwatch
Operating CH 16
channel
Periodically checks
Channel 16 while operating
on another channel.
When a signal is received:
• On Channel 16
Dualwatch/Tri-watch pauses on Channel 16 until the
signal disappears.
• On the Call channel
Tri-watch switches to Dualwatch until the signal on the
Call channel disappears.
16
Tri-watch
Call
channel
Operating
channel
CH 16
Periodically checks
Channel 16 and the Call
channel while operating on
another channel.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com

Operation

1 Select Dualwatch or Tri-watch in the Set mode. (Page 19)
2 Select the desired channel.
3 Hold down [DUAL] (SCAN) for 1 second to start
Dualwatch or Tri-watch.
• "DUAL" blinks during Dualwatch. "TRI" blinks during Tri-watch.
• A beep tone sounds when a signal is received on Channel 16.
4 To cancel Dualwatch or Tri-watch, push [DUAL] (SCAN)
again.
[Example]: Operating Tri-watch on INT channel 07.
Tri-watch starts.
Tri-watch resumes after
the signal disappears.
A signal is received on the
Call channel.
The signal received on
Channel 16 takes priority.