Atis Code (For Only The Nld And Frg Versions) - Icom IC-M25 Instruction Manual

10
ATIS CODE
The 10-digit ATIS code can be set and confirmed.
Depending on the dealer setting:
• The ATIS code setting may not be necessary.
• The code can be set only one time.
❏ Setting the ATIS code
1 Turn OFF the power.
2 While holding down [16/C], push [ ].
• Enters to the ATIS Code Setting mode.
3 Push [▲] or [▼] to select the
number for the first digit of the ATIS
code.
4 Push [CH/WX] to select the next
digit, and then push [▲] or [▼] to
select a number.
• Pushing [VOL/SQL] selects the
previous digit.
5 After the 10th digit has been input,
push [Hi/Lo] to store the code.
• The code number stops blinking.
• Push [16/C] to return to the normal
operating mode.
26
(For only the NLD and FRG versions)
First digit blinks
Selected number blinks
Next digit blinks
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
❏ ATIS code confirmation
(Can be performed only when the ATIS code has been programmed.)
1 Turn OFF the power.
2 While holding down [16/C], push [ ] to enter the ATIS
code confirmation mode.
• The digit number and the stored code number appear.
• Push [CH] to select the next digit, push [VOL/SQL] to select
the previous digit.
Push
to scroll
Entered ATIS code
3 Push [16/C] to exit the ATIS Confirmation mode.