Assigning A Function; D Assigning A Software Key Function To A Software Key - Icom IC-M804 Instruction Manual

Step 4. Setting a channel name
You can set a channel name of up to 10 characters for
each User channel or ITU Simplex channel. This may
be helpful to indicate the frequency's use or a vessel's
name.
1. Select "Name."
2. Enter a channel name, and then push
3. Push .
Save
• "Are You Sure?" is displayed.
4. Push to save the edited data.
OK
5. Push [MENU] to return to the Main screen.
OTHER FUNCTIONS AND OPERATIONS

■ Assigning a function

You can assign diff erent Software Key functions to a
key between Softkey 1 and Softkey 20. (p. 18)
You can also assign some Software Key functions to
[VOL] on the remote controller and [P] on the supplied
microphone.
D Assigning a Software Key function to a
Rotate
Software Key
1. Open "Softkey Assignment."
+
Push
2. Select a Softkey.
.
Finish
Push
[◄]/[►]
[▲]/[▼]
+
Push
3. Select a Software Key function.
4. Push [MENU] or
TIP: You can confi rm the selected function is
assigned to the Software Key after returning to the
Main screen.
[MENU] > Confi guration > Key Assignment >
Softkey Assignment
• The selected Software Key function is assigned
to the Softkey.
Exit
screen.
5
Rotate
+
Push
Rotate
+
Push
to return to the Main
5
18