Icom IC-M804 Instruction Manual page 42

6
DSC OPERATION
■ Sending DSC calls (other)
D Sending a Test call (Continued)
6. Select "Call Frequency."
7. Select a call frequency.
8. Push
Call
• "Transmitting Test Call" is displayed, and then
"Test Call" is displayed.
L See page 23 for details of the Software Key
functions in the DSC Task mode.
9. Push
Standby Mode
return to the Main screen.
37
Rotate
+
Push
Rotate
+
Push
to send a Test call.
, and then
OK
D Sending a Test call Acknowledgment
When you have received a Test call (p. 45), send
an Acknowledgment to the calling station. When "Test
ACK" is set to "Manual" (p. 49), do the following
steps to send an Acknowledgment.
1. While a Test call is being received, push
Alarm Off
2. Push
Accept
• The received call's information is displayed.
L If you want to immediately send an Acknowledgment
"Able to comply," push Able
L If you cannot communicate and want to return to the
Main screen, push Ignore
L If you want to put the task on hold, push Hold
3. Push
ACK
• The Call Contents screen is displayed.
to
4. Confirm the contents.
5. Push Call
6. Push
Standby Mode
return to the Main screen.
TIP: When "Test ACK" is set to "Auto," the transceiver
automatically transmits a Test Acknowledgment.
(p. 49)
to turn OFF the alarm.
.
.
.
.
Rotate
to send a Test Acknowledgment.
, and then
OK
.
to