D Sending A Group Call - Icom IC-M804 Instruction Manual

6
DSC OPERATION
■ Sending DSC calls (other)
D Sending an Individual Acknowledgment (Continued)
4. Confirm the contents.
5. Push Call
Acknowledgment.
• "Transmitting Individual ACK" is displayed, and then
"Individual Call" is displayed.
L See page 23 for details of the Software Key
functions in the DSC Task mode.
6. Hold down [PTT] to talk.
7. Push
Standby Mode
return to the Main screen.
TIP: When "Individual ACK" is set to "Auto (Able)"
or "Auto (Unable)," the transceiver automatically
transmits an Individual Acknowledgment. (p. 49)
31
Rotate
to send an Individual
, and then
OK

D Sending a Group call

A Group call enables you to send a DSC call to only a
specifi c group.
L You can send a Group call to a pre-entered Group ID or
manually enter the target group before sending. (p. 20)
1. Push
Compose Other
• The "COMPOSE NON-DISTRESS" screen is displayed.
L To display the screen from the Menu screen:
[MENU] > Compose Non-Distress
2. Select "Message Type."
3. Select "Group."
to
L "Category" is fixed to "Routine."
4. Select "Address."
5. Select a Group ID or "Manual Input."
NOTE: When "Manual Input" is selected in
this step, push the Keypad keys to manually
enter the target group.
.
Rotate
+
Push
Rotate
+
Push
Rotate
+
Push
Rotate
+
Push