D Sending A Position Request Acknowledgment - Icom IC-M804 Instruction Manual

6
DSC OPERATION
■ Sending DSC calls (other)
D Sending a Geographical Area call (Continued)
10. Select "Voice Frequency."
11. Select a voice frequency or "Manual Input."
NOTE: When "Manual Input" is selected in
this step, push the Keypad keys to manually
enter a voice frequency.
12. Push Call
• "Transmitting Geographical Call" is displayed, and
then "Geographical Call" is displayed.
L See page 23 for details of the Software Key
functions in the DSC Task mode.
13. Hold down [PTT] to talk.
14. Push
Standby Mode
return to the Main screen.
35
Rotate
+
Push
Rotate
+
Push
to send a Geographical Area call.
, and then
OK
D Sending a Position Request
Acknowledgment
When you have received a Position Request call,
send an Acknowledgment to the calling station. When
"Position ACK" is set to "Manual" (p. 49), do the
following steps to send an Acknowledgment.
1. While a Position Request call is being received,
push
Alarm Off
2. Push
Accept
• The received call's information is displayed.
L If you want to immediately send an Acknowledgment
"Able to comply," push Able
L If you want to immediately send an Acknowledgment
"Unable to comply," push Unable
L If you cannot send an Acknowledgment and want to
return to the Main screen, push Ignore
L If you want to put the task on hold, push Hold
3. Push a key to select an Acknowledgment option.
to
• The Call Contents screen is displayed.
TIP:
•
ACK (Able)
Sends an Acknowledgment with the position
and time data.
• ACK (Unable)
Sends an Acknowledgment with no position
and time data.
to turn OFF the alarm.
.
.
.
(Able to comply):
(Unable to comply):
.
.