Installing Scanner Software - Kodak PROFESSIONAL RFS 3600 User Manual

Installing Scanner
Software
1. Turn on the scanner and then turn on all other components of your
computer system.
2. Install your copy of Adobe Photoshop if you have not already done so.
3. Make sure the gamma for your monitor is calibrated properly by fol-
lowing instructions in the Photoshop manual.
4. Locate the CD enclosed with the scanner that contains this software:
KODAK PROFESSIONAL RFS 3600 Film Scanner Acquire Module /
for Macintosh.
KODAK PROFESSIONAL RFS 3600 Film Scanner TWAIN Data
Source / for WINDOWS Systems.
5. Close all open programs.
6. Place the CD into your computer.
7. If the installation does not start automatically:
A. Macintosh. Open the window for the CD and run the installer pro-
gram.
B. PC-Compatible. Click Start and click Run. In the Run dialog box,
type D:\setup, and then click OK. (If your CD-ROM drive is not "D"
use its letter instead.)
8. Complete the on-line instructions that appear on the screen.
9. Eject and store the CD; although installing the files is a onetime action,
you may need to reinstall them at a later time.
25