Calibration (Light Source); About (Version Numbers And Firmware Upgrade) - Kodak PROFESSIONAL RFS 3600 User Manual

For an explanation of the effect of this button when more than one image
is selected, refer to

Calibration (Light Source)

The light source is calibrated each time you turn on the scanner. However,
you can also control the frequency of the light source calibration. Click this
button, and on the dialog window that appears, indicate whether calibra-
tion should be performed before every frame scanned, or whether it should
be performed once for each filmstrip. If it is performed once for each
filmstrip, the calibration occurs when the first prescan is performed for
that filmstrip.
When scanning slides, the calibration is performed before each scan.

About (Version Numbers and Firmware Upgrade)

Click this button to display scanner information (including the software
and firmware version numbers), and an Upgrade button.
Click Upgrade to initiate a firmware upgrade; firmware is the software
within the scanner. You begin this process by receiving a new version of the
firmware, perhaps by downloading it from http://www.kodak.com. Down-
loading places a file on your hard disk. When you run that file, the firm-
ware is extracted and saved to the default location our your hard disk.
Then you use this button to copy that firmware file from your hard disk
into the scanner. When you click the button, a dialog window appears
allowing you to select the firmware file named 3600_nnn.bin, where nnn
represents version number. For example, if nnn is 101, it indicates firm-
ware version number 1.01. If you have followed the default installation
procedure, that filename should appear in the dialog box; otherwise locate
the firmware file in the location at which you saved it during initial soft-
ware installation. Initiate the upgrade and the new firmware will be down-
loaded to your scanner; wait while the upgrade procedure is completed.
CAUTION: It is important that you wait and allow the upgrade to com-
3 3 3 3 3
plete before performing any other computing activity. During the upgrade
Working with Multiple Selected
60
Images.