Slides - Kodak PROFESSIONAL RFS 3600 User Manual

C. Forward. This button performs two different functions. Tap the
button to move the filmstrip to the right (forward) in fine incre-
ments over the current frame. Press and hold this button for ap-
proximately one-half second to move the filmstrip one full frame to
the right. (As we'll explain later, this button performs the same two
functions as the Forward button in the scanner software.)

SLIDES

The scanner accommodates one mounted 35 mm slide at a time; no slide
holder is used.
1. Be certain the slide is clean and dust free; if not, clean it as needed.
2. Orient the slide as follows:
The top of the slide should enter the scanner first.
The image should be oriented so that the image is facing you, as you
would see it in real life (not mirror-imaged).
3. Hold the slide mount with your thumb and forefinger, and gently push
the slide into the slot on the front of the scanner until the slide is at the
rear of the slot.
4. When you are ready to remove the slide, extend your thumb and fore-
finger into the opening and pull the slide from the scanner.
IMPORTANT: The Eject button on top of the scanner does not func-
tion with slides.
28