Table Of Contents; Installing The Scanner - Kodak i4250 User Manual

2 Installation
Contents

Installing the scanner

Installing the Driver
Software - Windows
operating systems
A-61837 June 2015
Installing the scanner ................................................................................. 2-1
Installing the Driver Software ................................................................. 2-1
Attaching the output tray ........................................................................ 2-2
Connecting the power cord and USB cable ........................................... 2-2
Turning the scanner on .............................................................................. 2-3
Standalone mode ................................................................................... 2-4
Turning the scanner off .............................................................................. 2-4
Power modes ............................................................................................. 2-5
This section provides detailed information supporting the Installation Guide
that is provided with your scanner. Follow these steps in the order they are
provided to install your scanner.
NOTES:
• If you have already performed all of the steps in the Installation Guide, skip
this section.
• When positioning the scanner, be sure to provide adequate clearance at the
back of the scanner if you will be using the rear document exit. For more
information on the rear document exit, see the section entitled, "Using the
rear document exit" in Chapter 3.
Do not install the USB cable before installing the Driver Software.
1. Insert the Kodak i4250, i4650 and i4850 Scanner Installation disk in the
disk drive. The installation program starts automatically.
NOTE: If the disk does not start automatically, open the My Computer
icon on your desktop. Double-click the icon indicating your disk
drive, then double-click on setup.exe.
2. Follow the prompts that are displayed until the installation is complete.
2-1