Kodak PROFESSIONAL RFS 3600 User Manual page 15

1. Remove the scanner from its box and save any packing material.
2. Place the scanner near your computer.
3. Press the off end (O) of the power switch on the back of the scanner to
ensure that the switch is in its off position.
4. Connect the power cable that matches your local power supply to the
AC adapter.
5. Plug the end of the AC adapter cable into the plug on the scanner.
CAUTION: Use only the AC adapter supplied with the scanner; using
3 3 3 3 3
any other adapter will void your warranty.
6. Plug the other end of the power cable into a power source.
You are now ready to connect your scanner to your computer using either
the SCSI connection or the USB connection. If you are using a USB con-
nection, skip to Making a USB
connections follow.
Connection. Instructions for making SCSI
15