If No External Scsi Devices Are Connected - Kodak PROFESSIONAL RFS 3600 User Manual

If No External SCSI Devices Are Connected

The numbers in the artwork correspond to the numbered steps that follow.
1. Be sure power is turned off to your computer and scanner.
2. Select the SCSI II cable supplied with the scanner.
3. Attach the appropriate end of the SCSI cable to the SCSI port on the
computer; make sure the cable connector is well seated.
Note: If the connectors at the ends of the supplied cable do not allow
you to complete this step, you will need to purchase a SCSI cable that
will complete this connection. Cables are widely available from com-
puter retailers; if you must purchase a cable, be certain to obtain a high
quality cable with a continuous EMI shield over the cable and connec-
tors.
3
4
2
17
5