Kodak PROFESSIONAL RFS 3600 User Manual page 22

different number for the scanner. If necessary, refer to the documenta-
tion for those devices to determine how to find their numbers.
2. Double-check to make sure that the power to the scanner is off; the off
end (0) of the switch should be pressed in and the light near the front
right corner of the scanner should be off. (Make sure the power to the
scanner is off if you change its SCSI ID number at a later time.)
3. Using the guidelines below set the SCSI ID number by turning the SCSI
ID dial on the bottom of the scanner with a small screwdriver.
A. Macintosh. If you are working on a Macintosh Computer and are un-
certain of what number to choose, avoid numbers 0, 3, and numbers 7
and above, as well as any other number that has been assigned to an-
other connected device.
B. PC-Compatible. Do not choose 0 or numbers 7 and above. Do not
choose the number of your SCSI host adapter; consult your SCSI host
adapter manual to see if other SCSI IDs should not be used. Do not
choose any other number that has been assigned to another connected
device.
22