Kodak PROFESSIONAL RFS 3600 User Manual page 95

Unable to display the User's Manual. Please install Adobe Acrobat Reader
from the CD or directly from Adobe's web site, and try accessing the User's
Manual again.
Install Adobe Acrobat reader, and try again.
Unable to open Film Term [film term name]. Close and restart the scanner
software, and try again. If the problem persists, try another Film Term or, if
you must use this Film Term, reinstall the scanner software and try again.
There is a problem with the Film Term file. Run the installation pro-
gram again, and click Repair. Try again to reach the scanner software.
If the same problem occurs, quit Photoshop. Run the installation pro-
gram, but this time click Remove. Run the installation program again,
which will reinstall the scanner software. Try again to reach the scanner
software.
Unable to open Scan Profile [profile name]. You may try again or, if possible,
recreate these scanning parameters and save the Scan Profile again.
There is a problem with file you are trying to open. As suggested, you
may need to recreate the scan settings if possible and save the setting
again.
Unable to transfer image data from the film scanner to the computer. Try the
following:
Make sure the scanner power is on
Check all cables
With a SCSI connection (not USB), check for a SCSI ID conflict or im-
proper termination of the SCSI chain. Refer to the User's Manual on the
CD as needed.
For assistance with a SCSI connection refer to
tion in this manual.
95
Making a SCSI Connec-