Kodak PROFESSIONAL RFS 3600 User Manual page 92

Height] will be adjusted to maintain the locked aspect ratio, and the Magnifi-
cation will be adjusted.
For a detailed explanation of these relationships, refer to
Software (Output Size and Input
Scanning frame ##. NOTE: ## is the sequence number of the frame and not
the frame number from the film strip.
This message appears when you are scanning a frame or frames. If you
cancel from this message, the current scan is completed, and completed
scans to this point are retained.
The Black Balance value must be between 0 and 255, inclusive.
You have entered a balance value that is outside of the range. As
prompted, try again with a value from 0 to 255.
The directory directory name does not exist. Would you like to create it?
The directory specified in the Save to File dialog box does not exist.
Indicate that you want to create a new directory with this name, or
cancel the save and indicate a new directory.
The directory directory name is inaccessible. Please review and change the
directory name, or use the Browse function to search for and select a directory.
There is a problem with the directory specified in the Save to File dialog
box. As indicated enter a new name or use specify a new directory via
the Browse button.
The file directory and file name already exists. Do you want to replace the
existing file?
You have specified the directory and filename of an existing file. Make
the appropriate choice.
The film scanner is unable to transfer scanned image data to software title.
Please verify that software title is running and select OK to continue. Or select
Cancel to discard the image data and stop any remaining film scanning.
This message appears when the scanner software is running and the film
scanner is scanning film, but the host software (typically Photoshop)
has closed, not permitting the scanned image data to be transferred to
the host software. Make the appropriate choice.
Values).
92
Reference –