Kodak PROFESSIONAL RFS 3600 User Manual page 27

5. Orient the filmstrip as follows:
The film should be fed from the left of the scanner.
The highest frame number should enter the scanner first.
Data on the edge of the filmstrip should be at the top of the film.
These actions should result in the emulsion side of the film being face
down.
6. Gently move the filmstrip into the scanner from the left until the scan-
ner detects the film and pulls the film into the scanner.
7. Use the buttons on top of the scanner to reposition the filmstrip as
follows:
A. Eject. This button ejects the filmstrip to the left, out of the scanner.
As we'll explain later, this button has the same function as the Eject
Reverse button in the scanner software.
B. Reverse. This button performs two different functions. Tap the
button to move the filmstrip to the left (reverse) in fine increments
over the current frame. Press and hold this button for approximately
one-half second to move the filmstrip one full frame to the left. (As
we'll explain later, this button performs the same two functions as
the Reverse button in the scanner software.)
6
27
7A
7B
7C