Installing The Kodak Scan Station 700 Series - Scanner Administration Application - Kodak Scan Station 700 Administrator's Manual

Installing the
Kodak Scan Station
700 Series - Scanner
Administration
application
16
You must install the Kodak Scan Station 700 Series - Scanner
Administration application on a host PC. The Kodak Scan Station 700
Series - Scanner Administration application allows you to properly
setup, configure and manage Scan Station 700/710/720EX/730EX/500/
520EX devices over a network in an efficient and productive manner.
This application communicates with Kodak Scan Station 500 and 700
devices over the network; thereby minimizing the need for individual
access to multiple Scan Stations.
1. Insert the Installation CD titled, "Scanner Administration and
Supporting Documentation" in the CD-ROM drive on the computer
where the Kodak Scan Station 700 Series - Scanner Administration
application will be installed. The installation software starts up
automatically.
NOTE: If .NET Framework 4.0 is not already installed, the Kodak
Scan Station 700 Series - Scanner Administration
application installer will install them before installing the
Kodak Scan Station 700 Series- Scanner Administration
application.
2. Click Next when the Kodak Scan Station 700 Series splash screen
is displayed.
3. Click Next when the Welcome screen is displayed.
4. Click I Agree after you have read and agreed with the terms of the
Software License Agreement, then click Next.
The Ready to Install Program screen will be displayed.
5. Click Install to continue.
6. After the Kodak Scan Station 700 Series - Scanner Administration
application has been installed, click Finish.
7. Remove the Installation CD from the CD-ROM drive.
8. After installing and running the application, the Kodak Scan Station
700 Series - Scanner Administration main screen will be displayed.
A-61796 January 2017