Omron ZX-T Operation Manual page 76

Moving to FUN and HOLD
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT Keys to display
HOLD on the main display.
Selecting Hold Condition
3.
Press the UP or DOWN Key.
The sub-display will flash.
4.
Use the UP and DOWN Keys to select the
hold condition.
5.
Press the ENT Key to confirm the selection.
The setting will be registered.
The following settings are performed only if SP-H or SB-H is the selected hold condi-
tion.
Setting Trigger Levels
6.
Use the RIGHT or LEFT Key to display H-
LVL on the main display.
7.
Press the UP or DOWN Key.
The leftmost digit of the sub-display will flash.
8.
Use the Cursor Keys to set the trigger level.
Section 5
DETAILED SETTINGS
SUB
SUB
SUB
Move between digits.
Increment and decre-
ment the numeric value.
ZX-T
Operation Manual
73