Actual Camera Setting & Technical Notes; Using The Trigger Signal Through 6Pin - Omron Sentech STC-CMB200PCL Product Specifications And User's Manual

9. Actual Camera Setting & Technical Notes

Using the Trigger Signal through 6pin

1.Select the "[0]Trigger Shutter Mode(Long Exposure)" on Contiue/Trigger Shutter Mode Selection at
Standard tab through the control software(CLCtrl2).
2. Select the "[0H] FIL_TRG/LVAL/FVAL_TRG_IN" on SP Pin Signal Selection at SP_Pin tab.
3. Input the trigger signal through Pin2. As for using the software, please refer to the
Control Software.
SP Pin Signal Selection Table
Pin No
Addr=F0
0
1
2
3
4 ～15
STC-CMB200PCL / STC-CMC200PCL / STC-CMB401PCL / STC-CMC401PCL
Specifications and Users guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
5
SP1
AfterTrigger FILTER
F1h.0
CC1 T_EXP1
CC1 T_EXP1
4 3
SP2 SP3
LVAL FVAL
F1h.1 F1h.2
FRAME_REQ
FRAME_REQ
Reserved
No.13S080-10
0.
2
SP4
Trigger Input
F1h.3
HIGH in Exposure
FVAL
86