Switching To Another Bank - Omron ZFV-C Manual

Section 3

Switching to Another Bank

Switching to Another Bank
ZFV-C can hold up to eight sets of settings. These settings can be switched externally
according as inspection condition. A set of these settings is called a "bank".
A bank also contains the threshold value set in ADJ mode.
• What is a Bank?
■ Switching to another bank by control keys
1.
Switch to MENU mode.
2.
Select
3.
Select the desired bank number.
■ Switching to another bank by the external signal
A bank can be switched from one to another by combining BANK input signals 1 to 3.
This is possible with RUN mode only.
Wiring p.39
The setting for the bank switching method must be changed.
Setting the Bank Switching Method p.95
Bank switching is also possible by CompoWay/F or by entering a non-procedural command.
ZFV-C
58
User's Manual
Each set of measurement settings is
Threshold
.
Registered as a bank.
Threshold
BANK1
BANK2
BANK3
ADJ
MENU RUN
MENU
BANK
BANK
1.BANK1
2.BANK2
3.BANK3
4.BANK4
5.BANK5
6.BANK6
7.BANK7
8.BANK8