I/O Monitor Function - Omron ZFV-C Manual

I/O Monitor Function

This is a function to check the status of I/O signals.
Signal name
MENU mode-[SYS2]-[I/O MON]
Setting
TRIG
TEACH
BANK
OUTPUT
ENABLE
ERROR
Put the cursor on OUTPUT, ENABLE and ERROR, then press the SET button key to switch between "0"
and "1". The external device operations can be checked by switching output OFF/ON when the actual
measurements are not being performed.
SYS2/I/O MON
:
TRIG 0
:
TEACH 0
:
BANK 000
:
OUTPUT 0
:
ENABLE 0
:
ERROR 1
OK
Displays ON/OFF status of TRIG signal. (0: OFF, 1: ON)
Displays ON/OFF status of TEACH signal. (0: OFF, 1: ON)
Displays ON/OFF status of BANK signal. (0: OFF, 1: ON)
Expresses BANK1, BANK2, BANK3 sequentially from the right.
Displays ON/OFF status of OUTPUT signal. (0: OFF, 1: ON)
Displays ON/OFF status of ENABLE signal. (0: OFF, 1: ON)
Displays ON/OFF status of ERROR signal. (0: OFF, 1: ON)
Setting the System Environment
Signal status
(0: OFF, 1: ON)
Details
Section 5
ZFV-C
99
User's Manual