Setting For Amplifier Unit Gang-Mount - Omron ZFV-C Manual

Section 5

Setting for Amplifier Unit Gang-Mount

Setting for Amplifier Unit Gang-Mount

The gang-mount related menus are displayed only when Amplifier Unit are gang-mounted.
These settings must be made to each Amplifier Unit.
● Example 1: 1 sensor head + multiple amplifier units
Example of detection of input image from 1 sensor head with multiple amplifier units.
• To detect multiple areas such as a 4-sided POSITION, multiple item SEARCH, etc.
• To detect multiple types such as both SEARCH and AREA judgments.
AMP1
ENABLE signal
● Example 2: Multiple sensor heads + multiple amplifier units
Example of synchronizing and detecting multiple points of the same workpiece and
integrating judgments.
AMP1
ENABLE signal
ZFV-C
110
User's Manual
Images are transferred
from right-side to left-
side amplifier units.
AMP2 AMP3
TRIG signal
Measured with
images loaded from
each sensor head.
AMP2 AMP3
TRIG signal
MENU AMP1/2
TRIG LINK
HEAD NOTUSE
LINKOUT –
MENU AMP1/2
TRIG LINK
HEAD USE
LINKOUT –
AMP3
I/O
USE
All
AMP3
I/O
USE
All