Setting Usb/Rs-232C Communication Specifications; Usb Connection - Omron ZFV-C Manual

Section 5

Setting USB/RS-232C Communication Specifications

Setting USB/RS-232C Communication Specifications

Set the communication specifications of the Amplifier Unit according to those of external devices.
For details on communication commands, refer to the "Communication Command Reference" (provided
separately).
For the "Communication Command Reference", contact OMRON sales staff.
Before connecting/disconnecting external devices, make sure that the Amplifier Unit is turned OFF.
Breakdown or accidents may occur if this is done with the Amplifier Unit turned ON.

USB Connection

■ Connection
1.
Install the USB driver to the personal computer.
For the USB driver, please contact your OMRON representative.
Installation of the USB driver is necessary only when connecting an external
device to the USB interface for the first time.
2.
Insert one end of the USB cable to the
USB connector on the Amplifier Unit.
3.
Insert the other end of the USB cable to
the USB connector of the external device.
■ Setting communication specifications
Set the communication specifications of the Amplifier Unit according to those of exter-
nal devices.
MENU mode-[SYS2]-[COM]
Setting
LENGTH
PARITY
STOP BIT
BAUDRATE
NODE
DELIMIT
ZFV-C
102
User's Manual
The settings will be ignored.
CR, LF, CR+LF (default: CR)
Description