Section 7
Inspecting for the Presence of Electronic Components (Pattern)
Inspecting for the Presence of Electronic Components (Pattern)
Adjusting the Camera
1.
Adjust the camera so that the workpiece is displayed on the monitor.
Setting the Inspection Method
2.
Select
3.
Select [ITEM] and press the SET Key.
4.
Select
5.
Select
ZFV-C
150
User's Manual
OK
SEARCH
OK
ABCDE
If the workpiece is placed
SEARCH
NG
upside down, NG judg-
ABCDE
ment will be made since
" " is not detected inside
the teaching area.
NG judgment will also be
SEARCH
NG
made if the workpiece
contained in a case is
placed upside down.
Adjusting the Sensor Head Focus p.49
and press the SET Key.
and press the SET Key.
and press the SET Key.
MENU
TEACH/SEARCH
ITEM
REG.
TEACH/ITEM
PATTERN
TEACH/PATTERN