Setting The System Environment Changing The Measurement Speed; Setting The System Environment; Changing The Measurement Speed - Omron ZFV-C Manual

Section 5

Setting the System Environment

Setting the System Environment

Changing the Measurement Speed

The processing speed can be increased by narrowing the image acquisition area. Change
the measurement speed according to the size of workpiece and required speed.
MENU mode[SYS1]-[SPEED]
Setting
NORMAL (default)
FAST
MAX
• If [FAST] or [MAX] is selected, it is possible to select the part of the screen to be inspected.
• If [FAST] or [MAX] is selected, make sure that the inspection area and color selection area are within
the displayed image.
ZFV-C
96
User's Manual
NORMAL
Entire image
Acquires the entire image. (13 ms)
Narrows the image acquisition area to 1/2. This will increase the measurement
speed. (8 ms)
Narrows the image acquisition area to 1/4. This will increase the measurement
speed. (5 ms)
Changing the Image Display Position (Partial Function) p.93
FAST
MAX
1/2 1/4
Details