Operation Mode
There are 3 ZFV-C operating modes as follows. Switch to the mode that you meet, before
you start operation.
To switch the operating mode, use the mode switch.
Mode
MENU mode
ADJ mode
RUN mode
There are two setup menus in the MENU mode. Switch the menu according to your spe-
cific requirements.
To switch the menu, use the menu selector switch.
Setup Menu
STD menu
EXP menu
Menu Hierarchy Differences by Menus p.16
ESC
This mode is for executing teaching or setting up the measurement condi-
tions.
This mode is for setting the judgment threshold values.
This mode is for performing actual measurement.
STD
EXP
Description
This is the standard menu.
First, set the measurement conditions in this menu.
This is the expert menu.
Switch to this menu to make a more advanced setup.
ADJ
MENU
RUN
Description
Section 1
Operation Mode
Top Screen
ZFV-C
User's Manual
27