Omron ZFV - V2.0 User Manual page 81

Section 3
Customizing Measurement conditions
●
Specifying edge detection conditions
Set this when [EDGE] is selected to [MODE].
Set the direction in which edges are searched and the change in density.
Example)
• Selecting the color of edges
Select the direction of density change for the edge to be detected.
MENU Mode-[CUSTM]-[MODE DTL]-[COLOR]
WHITE
BLACK (default value)
• Selecting the edge detection direction
Select the direction in which edges are searched.
MENU Mode-[CUSTM]-[MODE DTL]-[DIRECTION]
(default value)
ZFV
80
User's Manual
To correction position by this edge
Setting
A change from dark to light is judged as an edge.
A change from light to dark is judged as an edge.
Setting
Searches from bottom to top.
Searches from top to bottom.
Searches from left to right.
Searches from right to left.
COLOR: BLACK
EDGE:
Description
Description