Setting The On Delay Time - Omron ZFV - V2.0 User Manual

Section 3
Changing the Input/output Conditions
■ Selecting one-shot output ON/OFF
Set whether or not to enable one-shot output on the OUTPUT signal.
MENU Mode-[SYS2]-[OUTPUT]-[ONE SHOT]
OFF (default value)
ON
■ Setting the one-shot output time
OUTPUT turns ON for the preset time from when the OUTPUT signal turns ON.
This setting is valid only when [ONE SHOT] is set to [ON].
MENU Mode-[SYS2]-[OUTPUT]-[OUTPUT TIME]
0 to 255 (default value:0)

Setting the ON delay time

Set this item to delay the timing that the OUTPUT signal turns ON.
OUTPUT ON at OK judgment in continuous measurement
Judged as NG
OUTPUT
MENU Mode-[SYS2]-[OUTPUT]-[ON DELAY]
Setting
0 to 255 (default value:0)
ZFV
66
User's Manual
Setting
One-shot output is not performed.
One-shot output is performed.
When one-shot output is set to [ON], the OFF delay time setting is disabled.
Setting
Set the time (ms) that OUTPUT is turned ON.
Judged as OK
OFF
ON
Delay time
Set the time (ms) to delay turning ON of the OUTPUT signal.
Description
Description
Judged as NG
Description