Omron ZFV - V2.0 User Manual page 58

■ POSITION
● Switch to ADJ Mode.
Amount
of shift
UP/DOWN keys:
Setting item
Position 0 to 468
Edge level 0 to 100
■ COUNT
● Switch to ADJ Mode.
Setting item
Number 0 to 255
Edge level 0 to 100
● Adjustment of edge position
Measured
value
Amount
of shift
Change values.
Range
Amount of shift from reference position
This is the level of change in density judged to be an edge.
Adjust this level when measurement is unstable.
p.56
● Adjustment of number
Measured
value
Lower Upper
limit limit
UP/DOWN keys: Change values.
Range
This is the number of times that counting is to be performed.
This is the level of change in density judged to be an edge.
Adjust this level when measurement is unstable.
p.56
Adjusting Threshold Values
● Adjustment of edge level
Edge level
Edge level
• When edge detection direction is
UP/DOWN keys: Change values.
• When edge detection direction is
LEFT/RIGHT keys: Change values.
Details of Adjustment
● Adjustment of edge level
Edge level
Details of Adjustment
Section 3
ZFV
57
User's Manual