Omron ZFV - V2.0 User Manual page 82

■ Changing the search area
Change the area to search edges or the model in.
Specify the top left coordinate and bottom left coordinate of the area.
MENU Mode-[CUSTM]-[MODE DTL]-[SEARCH AREA]
When searching edges
Measurement can be performed only when the search area contains an edge.
Determine the size and position of the area taking the movement range of the workpiece into con-
sideration.
Good
■ Raising detection stability
This item is displayed only when [CHARA2] is set.
MENU Mode-[CUSTM]-[STABLE]
Setting
OFF (default value)
ON
Customizing Measurement conditions
Search area
Good
Standard detection method.
Detailed detection method.
The process time is longer than OFF.
Search area
Bad
Description
Section 3
ZFV
81
User's Manual