Count - Omron ZFV - V2.0 User Manual

COUNT

■ Specifying edge detection conditions
Set the direction in which edges are searched and the change in density.
Example)
To detect this number
●
Selecting the color of edges
Select the direction of density change for the edge to be detected.
MENU Mode-[CUSTM]-[COLOR]
Setting
WHITE (default value)
BLACK
●
Selecting the edge detection
Select the direction in which edges are searched.
MENU Mode-[CUSTM]-[DIRECTION]
Setting
(default value)
Customizing Measurement conditions
A change from dark to light is judged as an edge.
A change from light to dark is judged as an edge
Searches from top to bottom.
Searches from left to right.
COLOR : BLACK
DIRECTION :
Description
Description
Section 3
ZFV
77
User's Manual