Settings During Application Extended Connection
These menus are displayed only when Amplifier Units are gang-mounted.
Set to the all gang-mounted Amplifier Units.
Example 1)
AMP2: TRIG signal input, AMP2: Output of overall
judgment result
Example 2)
AMP2: TRIG signal input, AMP2: Output of overall
judgment result
Specifying the Amplifier Unit to input the trigger
Set whether or not to input the TRIG signal to an Amplifier Unit.
MENU Mode-[SYS2]-[LINKSET]-[TRIG]
Setting
I/O (default value)
LINK
Settings During Application Extended Connection
Set to only the Amplifier Unit to which the TRIG signal is to be input.
Synchronizes to the TRIG signal from the Amplifier Unit gang-mounted on the right
side.
MENU
AMP1
TRIG
LINK
HEAD
NOTUSE
OUTPUT
—
MENU
AMP1
TRIG
LINK
HEAD
USE
OUTPUT
—
Description
Section 3
AMP2
I/O
USE
All
AMP2
I/O
USE
All
ZFV
69
User's Manual