Section 2
Amplifier Unit
(6)
TEACH (teaching input)
There are two teaching modes, workpiece stop teaching and workpiece move
teaching. These teaching modes can be selected in the menu.
(7)
TRIG (measurement trigger input)
There are two measurement modes, synchronous measurement and continuous
measurement. Which mode of measurement is to be performed in is selected in the
menu.
(8)
BANK1 (bank switching input 1)
(9)
BANK2 (bank switching input 2)
(10) BANK3 (bank switching input 3)
Timing charts
■ I/O Circuit Diagrams
●
NPN output type (ZFV-A10/A20)
ZFV
32
User's Manual
Selecting the teaching mode from an external device
Selecting the measurement timing
Bank switching
p.36
p.34
p.61
p.61
Brown
Power supply (24VDC)
Load
Black
OUTPUT
Load
Orange
ENABLE
Light blue
ERROR
Blue
GND(0V)
Yellow
TEACH
Pink
TRIG
Gray
BANK1
Green
BANK2
Red
BANK3
Load
24VDC