Creating A Simultaneous Sequence Divergence/Convergence - Omron WS02-CXPC1-V8 - V8.1 REV 02-2009 Operation Manual

Editing the SFC Chart
A convergence and a subsequent step will be added.
2 Right-click the created convergence, and select Connections - Add Connection
from the pop-up menu.
3 Confirm that the transitions to be joined are selected in the Add Connection dialog,
and click OK.
The selected transitions will be joined to the convergence.
Note 1:
3-2-8

Creating a Simultaneous Sequence Divergence/Convergence

Creating a Simultaneous Sequence Divergence
Adding 2 Steps
A simultaneous sequence divergence can be added after a transition.
1 Right-click a transition, and select Add Simultaneous Sequence Divergence
from the pop-up menu.
The Add Connection dialog will be displayed.
You can also right-click the convergence, select Connections - Add Connection to
Convergence from the pop-up menu, and drag the lead line to the target transition to
connect transitions to a convergence.
2: Right-click the line next to a conditional branch and select Use Default Transition
Precedence to numerically display the execution order starting from 1. Then
double-click the numbers to change the execution order as desired.
Section 3-2
79